If you have an older version of GRBL (prior to 1.1f) it's highly recommended to upgrade the firmware, as Laser Mode also prevents the machine from pausing with every power change.You might need to enable "Laser Mode" if you have GRBL 1.1f or later ( $32=1).The value in LightBurn is called "S-Value Max", in the Device Settings. You might need to adjust your spindle max RPM value ( $30) to match the LightBurn default (1000) or vice versa.This board does not offer control of power through software – we recommend upgrading the board to take full advantage of LightBurn.If you have a GCode-based system, like a Shapeoko, Eleksmaker, X-Carve, or Acro system, you might need to make some simple changes to get the most from LightBurn. Please note that LightBurn does not support the stock M2-Nano board in the popular K40 laser. If it doesn’t work, sometimes it only takes a day or two to make the required changes to support a new board in these existing families. If your controller is GCode, Ruida, Trocen, or TopWisdom based, even if it’s not listed it might be supported already – Download the free trial and try it for yourself. More controllers will be added soon, so if you don’t see yours listed, send us a message – maybe we’re already working on it! Supported Trocen controllers include the AWC708C, AWC608, and TL-3120. Supported Ruida controllers include the RDC6442G/S, RDC6445G, RDC6332G, RDLC-320A, and R5-DSP. Supported GCode controllers,include Grbl, Smoothieware, Grbl-LPC, and Marlin. We currently support most Ruida, Trocen, TopWisdom, and GCode based controllers. LightBurn talks directly to your laser, without the use of additional software.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |